International delivery! We ship cutters All over the World!

Bendable blade Type-G30

16.80 (w/o VAT 14.00)

Just bent it to the shape You want!

The bendable blade Type-G30 is used as a cutting element for grooving platforms (The Groover platform and “MINI” Groover). The blade has a medium level of elasticity and may be bent without special tools. The flexible blade Type-G30 is 30 cm (11.8 inches) long and 5 mm (0.2 inches) wide

The desired shape (for example, a semicircle with different diameters for cutting grooves for tubes) can be changed by hand or by using whatever tools are available.

      The system has earned the confidence of most builders who had used it.
     ⇒ The blade is 300 mm (11.8 inches) long and 5 mm (0.2 inches) wide.

     ⇒ 3 in 1. Make two or even three small blades from one Type-G30!
     ⇒ Type-G30 blade may be bent without special tools.
     ⇒ Bent the Type-G30 blade to any kind of geometric or non-symmetric shapes.

Description

Bendable cutting blade Type-G30! allows the user to create a wide variety of the geometric or non-symmetric shapes that cannot be made with any other blades. Use pliers for straight rectangular or angular bends or just bend the blade using, for example, the angle of the table. The main advantages of the bendable blade Type-G30! is compatibility with our main adapters and chance to make two or even three different cutting blades from one Type-G30! blade. The bendable blade Type-G30 are thin and rigid making them easy to control through the foam.

Bendable blade Type-G30 overview

Bendable blade Type-G30


| International Express delivery is carried out by TNT, UPS, DPD, Regular Post. Shipping & Delivery terms!


HWS250! Full video!

HWS250! Basic kit


Want to get in touch?
We’d love to hear from you!

Chat with us from the corner of the page 
or e-mail us: shop@hws250.com

Additional information

Weight 0.01 kg
Dimensions 30 × 0.5 × 0.1 cm
Delivery

We ship cutting units and accessories all over the world!

Availability

Bendable blade Type-G30! is available in stock

Important

When using optional accessories, always take into account the length of the blade fixed in the holders of the platforms and choose/adjust the correct blade heating cycle. To do this, follow these steps:
1) Set the step-by-step power controller to the minimum value.
2) Fix the blade to the platform holders.
3) Activate the cutter by holding down the power button (switch)
4) Touch the material with the blade.
5) Turn the step-by-step power controller until the blade starts to cut the material smoothly.
Note that it takes 3 to 5 seconds for the blade to heat to the value set on the controller.
6) When the right value is set, you can now start working.

NB! Do not use the maximum power without the need for a long time. This can lead to strong cutting blade deformation or HWS250! breakage.

Close menu
×

Cart