-5%

Grooving platform “GROOVER”

Original price was: 43.00€.Current price is: 40.85€. (w/o VAT 40.85)

Cut perfect grooves & rabbets!

The foam grooving adapter/platform is designed for cutting different grooves, recesses and corner cuts or cut out any shapes that bendable blade Type-G30! allows to. The platform – “Groover” works only with the bendable blade Type-G30 (NB! sold separately). The Type-G30 blade bent into the desired shape is fixed in special width adjustable holders, which can also be used to adjust the height of the blade.

Description

The grooving adapter “Groover” is equipped with detachable guide rails which can be adjusted over the entire width of the platform. You can use one or two rails or remove them completely by unscrewing the fixing bolts. The allen key is attached to the top of the adapter for fast installation of the “Groover” adapter/platform on the hot knife cutter HWS250!

  • Adjustable holders.
  • Fast and easy blade installation/replacement.
  • Auxiliary supports for smooth and accurate cutting.
  • Measuring scale on the groover for setting the correct size.
  • The platform works only with bendable blade Type-G30! (sold separately).

The overview of the Grooving platform.

Grooving Platform for Hot Knife cutter HWS250!


| International Express delivery is carried out by TNT, UPS, DPD, Regular Post.  Shipping & Delivery terms * 


HWS250! Full video!

HWS250! Basic kit


Want to get in touch?
We’d love to hear from you!

Chat with us ONLINE from the corner of the page
or e-mail us: shop@hws250.com


Additional information

Weight 0.4 kg
Dimensions 19 × 16 × 7 cm
Delivery

We ship cutting units and accessories all over the world!

Availability

Grooving platform – "GROOVER" is available in stock

Important

When using optional accessories, always take into account the length of the blade fixed in the holders of the platforms and choose/adjust the correct blade heating cycle. To do this, follow these steps:
1) Set the step-by-step power controller to the minimum value.
2) Fix the blade to the platform holders.
3) Activate the cutter by holding down the power button (switch)
4) Touch the material with the blade.
5) Turn the step-by-step power controller until the blade starts to cut the material smoothly.
Note that it takes 3 to 5 seconds for the blade to heat to the value set on the controller.
6) When the right value is set, you can now start working.

NB! Do not use the maximum power without the need for a long time. This can lead to strong cutting blade deformation or HWS250! breakage.

You may also like…